I have recently purchased a 2009 Ford Focus Zetec 1.6TDCi (109PS) Hatchback. The heater blower is working i.e you set it to 1, 2, 3 or 4 and the blower changes speed/force. The blend control is also working i.e you can point it to windscreen/front vents or foot well etc.
TheOneAndOnly. Having an issue with my S-Max recently where it could start and run no problem for a few days (or more) then intermitenly not start, even if left over night. It then may start after 2-5 goes of turning over. I've gone to two mechanics, full service, brand new battery, diagnosic computers show no codes at all.
Since replacing the chain is another very expensive job (around 500 eur) and I also had some pretty bad rust problems on the jackpoints and fenders I've had enough and just bought a mk 2.5 focus today which recently had the engine rebuilt (due to broken wet belt tensioner not the belt - previous owner said so) and both timing belts repalced and
Ford Sync 1.1 - you’ll need a USB drive formatted as FAT32 If you search the forum you’ll see that there were some issues with the later firmware for 1.1 as hosted on the Ford servers. One of the members on here was hosting and providing a link to a functioning update.pDjaBx8.